Electra
Lockheed L-188C Electra

The Differential Absorption Carbon monOxide Measurements (DACOM) is an airborne in situ spectrometer system. It uses the differential absorption technique and an infrared tunable diode laser (TDL) to collect measurements of nitrous oxide (N2O), carbon dioxide (CO2), carbon monoxide (CO), and methane (CH4) in the atmosphere. DACOM operates across the 4.7, 4.5, and 3.3 μm wavelengths to access the absorption lines for CO, N2O, and CH4. It has a measurement frequency of 5 Hz and a precision of about 1 ppbv.

Gas Chromatography/Mass Spectrometry (GC-MS) is an in situ measurement technique used to analyze volatile organic compounds (VOCs) in the atmosphere. It employs gas chromatography to separate components of an air sample, and mass spectrometry to ionize, identify, and quantify gas species. GC-MS is utilized to detect VOCs, halocarbons, hydrocarbons, and various other pollutants. It can be used for ground-based or airborne operations.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

NOx/NOxy is an in situ chemiluminescence instrument that measures nitrogen oxides and ozone in the atmosphere. It offers a spatial resolution better than 100 meters at typical DC-8 research flight speeds. NOx/NOxy can be used on ground-based, airborne, and shipborne platforms, enabling it to support various atmospheric chemistry and air quality studies.

A Tunable Diode Laser Absorption Spectrometer (TDLAS) is an in situ optical spectrometer used either on aircraft or on the ground. TDLAS detects the wavelength-dependent absorption of light to measure the concentrations of various trace gases. It can also identify the gas species' temperature, pressure, velocity, and mass flux when applicable. TDLAS typically has a time resolution of 1 second.

The Forward Scattering Spectrometer Probe (FSSP) is an in situ airborne optical particle counter initially developed by Particle Measuring Systems, Inc. It determines particle size distribution by measuring the light intensity scattered by individual particles within the cloud. FSSP can detect particles ranging from 0.5 to 47 μm in diameter. It functions at a wavelength of 633 nm and typically samples at a rate of 1 Hz.

Chilled Mirror Hygrometers (CMHs) are in situ sensors that directly measure dew point temperature by collecting water vapor on a chilled mirror surface. The mirror's temperature is lowered with thermoelectric coolers until water vapor from the sample gas condenses as dew or frost. The mirror's temperature is then measured using a platinum resistance thermometer (PRT) to determine the dew point and humidity. CMHs have been utilized on both airborne and ground-based platforms and serve as the NIST traceable reference standard for calibrating other sensors.

The Georgia-Tech Laser Induced Fluorescence (GT-LIF) is an airborne in situ sensor that detects nitric oxide (NO), formaldehyde (HCHO), and nitrogen dioxide (NO2). It uses laser-induced fluorescence, which excites gas molecules to a higher energy state and then detects the emitted fluorescence as they return to a lower energy state. The emitted fluorescence helps determine gas concentrations and mixing ratios. For NO, molecules are excited at 226 nm, with fluorescence detected at 247 nm. HCHO is excited at 353 nm, and its fluorescence is detected at 400-450 nm, while NO2 is excited at 435 nm and detected around 780 nm.

The Passive-Cavity Aerosol Spectrometer Probe (PCASP) is an in situ airborne optical spectrometer manufactured by Droplet Measurement Technologies. It detects light scattered by particles to determine aerosol size distribution and concentration within the 0.1 to 3.0 μm range. PCASP operates at a wavelength of 632 nm and typically samples at 10 Hz.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The Holographic Airborne Rotating Lidar Instrument Experiment (HARLIE) is an airborne scanning lidar system. It measures lidar backscatter at 1064 nm using holographic scanning receivers. These measurements can be used to retrieve aerosol backscatter profiles, boundary layer height, and cloud layers. HARLIE has a range resolution of 30 m and an integration time of 100 msec.

The King Probe is an in situ airborne cloud instrument developed by Warren King (Commonwealth Scientific and Industrial Research Organisation) and manufactured by Particle Measuring Systems (PMS) and Droplet Measurement Technologies (DMT). The King Probe measures cloud liquid water content (LWC) by detecting the heat released when water droplets vaporize. It operates at a constant temperature of approximately 100°C and has a data output rate of 1 to 10 Hz. The probe is commonly used in studies of cloud microphysics and aircraft icing.

Generic-Micophysics Probes (Gen-Microphysics) refer to non-specific cloud probes on a platform used to measure cloud microphysics. These are typically in situ probes that measure the physical properties of clouds. These measurements can include particle size distribution, droplet growth, cloud optical thickness, liquid water content, droplet concentration, and cloud condensation nuclei.

The 2D-C/P Hydrometeor Imaging Probe (2D-C/P) is an in situ, airborne instrument that captures images of hydrometeors. It records these images by detecting the illuminated or shadowed states of the photodiode array as the shadow of the hydrometeors passes over. 2D-C/P also offers measurements of particle size distribution, cloud droplet concentration, and hydrometeor shape. Typically, 2D-C/P probes have an image resolution of 25 micrometers and can image hydrometeors with diameters up to 1600 micrometers.

The Precision Radiation Thermometer (PRT-5) is an in situ infrared temperature sensor. It makes non-contact infrared (8-14 μm) temperature measurements between -50 to 150 degrees Celsius with an accuracy of 0.5 degrees Celsius. It has a typical field of view of 2 degrees and a response time of either 0.3 Hz, 3 Hz, or 30 Hz. PRT-5 can be deployed on aircraft, vehicles, research vessels, and other ground-based platforms. It can be used for sea surface, ocean water, cloud, and air temperature measurements.

The Passive-Cavity Aerosol Spectrometer Probe (PCASP) is an in situ airborne optical spectrometer manufactured by Droplet Measurement Technologies. It detects light scattered by particles to determine aerosol size distribution and concentration within the 0.1 to 3.0 μm range. PCASP operates at a wavelength of 632 nm and typically samples at 10 Hz.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The Condensation Nuclei Counter (CNC) is an in situ optical sensor produced by Droplet Measurement Technologies. It detects cloud condensation nuclei (CCN) by supersaturating the sampled air, allowing CCN particles to become detectable. The particles are then measured with an optical particle counter (OPC). CNC can detect particles from 0.75 to 10 μm in diameter and operates at a sampling rate of 1 Hz. It is suitable for both airborne and ground-based operations.

The King Probe is an in situ airborne cloud instrument developed by Warren King (Commonwealth Scientific and Industrial Research Organisation) and manufactured by Particle Measuring Systems (PMS) and Droplet Measurement Technologies (DMT). The King Probe measures cloud liquid water content (LWC) by detecting the heat released when water droplets vaporize. It operates at a constant temperature of approximately 100°C and has a data output rate of 1 to 10 Hz. The probe is commonly used in studies of cloud microphysics and aircraft icing.

The 2D-C/P Hydrometeor Imaging Probe (2D-C/P) is an in situ, airborne instrument that captures images of hydrometeors. It records these images by detecting the illuminated or shadowed states of the photodiode array as the shadow of the hydrometeors passes over. 2D-C/P also offers measurements of particle size distribution, cloud droplet concentration, and hydrometeor shape. Typically, 2D-C/P probes have an image resolution of 25 micrometers and can image hydrometeors with diameters up to 1600 micrometers.

This description will be added in a future version.

The ELectra DOppler RAdar (ELDORA) is an airborne radar system developed by the National Center for Atmospheric Research (NCAR) and France's Centre de Recherches en Physique de L'Environnement Terrestre et Planetaire (CRPE). It was designed to operate on the NCAR Electra aircraft, but it also operates on the Naval Research Lab (NRL) P-3 aircraft. It is an X-band (9.3-9.8 GHz) radar that measures radar reflectivity, Doppler velocity, and other radar parameters to characterize convective systems and clouds. ELDORA has a beamwidth of 1.8 degrees and a range resolution of 37.5 to 1200 meters, depending on radar configuration.

The Forward Scattering Spectrometer Probe (FSSP) is an in situ airborne optical particle counter initially developed by Particle Measuring Systems, Inc. It determines particle size distribution by measuring the light intensity scattered by individual particles within the cloud. FSSP can detect particles ranging from 0.5 to 47 μm in diameter. It functions at a wavelength of 633 nm and typically samples at a rate of 1 Hz.

A pyrgeometer is a ground-based or airborne passive radiation sensor. It measures downward and upward longwave radiation in the 4-50 μm spectral range. Pyrgeometers measure changes in resistance/voltage using a thermopile sensor to determine longwave radiation. These measurements can be used to calculate the infrared radiation flux. Pyrgeometers are typically used for climatological, meteorological, and agricultural applications.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The Differential Absorption Carbon monOxide Measurements (DACOM) is an airborne in situ spectrometer system. It uses the differential absorption technique and an infrared tunable diode laser (TDL) to collect measurements of nitrous oxide (N2O), carbon dioxide (CO2), carbon monoxide (CO), and methane (CH4) in the atmosphere. DACOM operates across the 4.7, 4.5, and 3.3 μm wavelengths to access the absorption lines for CO, N2O, and CH4. It has a measurement frequency of 5 Hz and a precision of about 1 ppbv.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

The Differential Absorption Lidar (DIAL) is an airborne lidar system developed at NASA’s Langley Research Center (LaRC). It uses four lasers to detect lidar backscatter and provide profile measurements of ozone and aerosols in the atmosphere. DIAL operates in the ultraviolet (289-300 nm) for ozone detection and in the visible (572-600 nm) and infrared (1064 nm) for aerosols. It has a horizontal spatial resolution of approximately 15 km and a measurement accuracy of 5 ppbv.

NOx/NOxy is an in situ chemiluminescence instrument that measures nitrogen oxides and ozone in the atmosphere. It offers a spatial resolution better than 100 meters at typical DC-8 research flight speeds. NOx/NOxy can be used on ground-based, airborne, and shipborne platforms, enabling it to support various atmospheric chemistry and air quality studies.

The High-Sensitivity Fast-Response CO2 Analyzer (Harvard CO2) is an in situ airborne spectrometer operated by Harvard University. It measures carbon dioxide (CO2) concentrations using a modified nondispersive infrared CO2 analyzer. CO2 mixing ratios are determined by measuring absorption at 4.26 μm. Harvard CO2 has a measurement sampling rate of 0.5 Hz and a precision of 0.05 ppm. Harvard is typically deployed on high-altitude aircraft like the ER-2, but it has been used for balloon-borne measurements.

The Turbulent Air Motion Measurement System (TAMMS) is an in situ airborne sensor used to gather aircraft navigation information. TAMMS consists of several subsystems, including pressure transducers and temperature sensors, an aircraft inertial navigation system, a central data acquisition system, and water vapor and other gas sensors. It provides measurements of aircraft position, flight level winds, temperature, pressure, and water vapor. TAMMS has a typical sampling frequency of less than 1 second and a spatial resolution of 5 meters.

The PeroxyAcetylNitrate, Aldehydes, and Ketones (PANAK) is an in situ airborne gas chromatographic system. It is a three-channel gas chromatography used for the measurement of low-ppt levels of peroxyacyl nitrates (PANs), aldehydes, and ketones. It measures PANs, alkyl nitrates, and tetrachloroethane using electron capture detectors (ECD) in channels 1 and 2. It measures selected aldehydes, alcohols, ketones, and nitriles using a photoionization detector in channel 3. Channels 1 and 2 have a sampling frequency of 2.5 minutes, while channel 3 has a sampling frequency of 5 minutes.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The Differential Absorption Carbon monOxide Measurements (DACOM) is an airborne in situ spectrometer system. It uses the differential absorption technique and an infrared tunable diode laser (TDL) to collect measurements of nitrous oxide (N2O), carbon dioxide (CO2), carbon monoxide (CO), and methane (CH4) in the atmosphere. DACOM operates across the 4.7, 4.5, and 3.3 μm wavelengths to access the absorption lines for CO, N2O, and CH4. It has a measurement frequency of 5 Hz and a precision of about 1 ppbv.

Gas Chromatography/Mass Spectrometry (GC-MS) is an in situ measurement technique used to analyze volatile organic compounds (VOCs) in the atmosphere. It employs gas chromatography to separate components of an air sample, and mass spectrometry to ionize, identify, and quantify gas species. GC-MS is utilized to detect VOCs, halocarbons, hydrocarbons, and various other pollutants. It can be used for ground-based or airborne operations.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

The Differential Absorption Lidar (DIAL) is an airborne lidar system developed at NASA’s Langley Research Center (LaRC). It uses four lasers to detect lidar backscatter and provide profile measurements of ozone and aerosols in the atmosphere. DIAL operates in the ultraviolet (289-300 nm) for ozone detection and in the visible (572-600 nm) and infrared (1064 nm) for aerosols. It has a horizontal spatial resolution of approximately 15 km and a measurement accuracy of 5 ppbv.

NOx/NOxy is an in situ chemiluminescence instrument that measures nitrogen oxides and ozone in the atmosphere. It offers a spatial resolution better than 100 meters at typical DC-8 research flight speeds. NOx/NOxy can be used on ground-based, airborne, and shipborne platforms, enabling it to support various atmospheric chemistry and air quality studies.

The Turbulent Air Motion Measurement System (TAMMS) is an in situ airborne sensor used to gather aircraft navigation information. TAMMS consists of several subsystems, including pressure transducers and temperature sensors, an aircraft inertial navigation system, a central data acquisition system, and water vapor and other gas sensors. It provides measurements of aircraft position, flight level winds, temperature, pressure, and water vapor. TAMMS has a typical sampling frequency of less than 1 second and a spatial resolution of 5 meters.

The Georgia-Tech Laser Induced Fluorescence (GT-LIF) is an airborne in situ sensor that detects nitric oxide (NO), formaldehyde (HCHO), and nitrogen dioxide (NO2). It uses laser-induced fluorescence, which excites gas molecules to a higher energy state and then detects the emitted fluorescence as they return to a lower energy state. The emitted fluorescence helps determine gas concentrations and mixing ratios. For NO, molecules are excited at 226 nm, with fluorescence detected at 247 nm. HCHO is excited at 353 nm, and its fluorescence is detected at 400-450 nm, while NO2 is excited at 435 nm and detected around 780 nm.

The PeroxyAcetylNitrate, Aldehydes, and Ketones (PANAK) is an in situ airborne gas chromatographic system. It is a three-channel gas chromatography used for the measurement of low-ppt levels of peroxyacyl nitrates (PANs), aldehydes, and ketones. It measures PANs, alkyl nitrates, and tetrachloroethane using electron capture detectors (ECD) in channels 1 and 2. It measures selected aldehydes, alcohols, ketones, and nitriles using a photoionization detector in channel 3. Channels 1 and 2 have a sampling frequency of 2.5 minutes, while channel 3 has a sampling frequency of 5 minutes.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The King Probe is an in situ airborne cloud instrument developed by Warren King (Commonwealth Scientific and Industrial Research Organisation) and manufactured by Particle Measuring Systems (PMS) and Droplet Measurement Technologies (DMT). The King Probe measures cloud liquid water content (LWC) by detecting the heat released when water droplets vaporize. It operates at a constant temperature of approximately 100°C and has a data output rate of 1 to 10 Hz. The probe is commonly used in studies of cloud microphysics and aircraft icing.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

The Precision Radiation Thermometer (PRT-5) is an in situ infrared temperature sensor. It makes non-contact infrared (8-14 μm) temperature measurements between -50 to 150 degrees Celsius with an accuracy of 0.5 degrees Celsius. It has a typical field of view of 2 degrees and a response time of either 0.3 Hz, 3 Hz, or 30 Hz. PRT-5 can be deployed on aircraft, vehicles, research vessels, and other ground-based platforms. It can be used for sea surface, ocean water, cloud, and air temperature measurements.

Generic-Radiation Sensors (Gen-Radiation) refer to non-specific instruments used to measure atmospheric radiation. These are typically passive sensors that detect radiation within the atmosphere. Measurements can include shortwave radiation, longwave radiation, solar irradiance, and solar radiation.

Generic-Micophysics Probes (Gen-Microphysics) refer to non-specific cloud probes on a platform used to measure cloud microphysics. These are typically in situ probes that measure the physical properties of clouds. These measurements can include particle size distribution, droplet growth, cloud optical thickness, liquid water content, droplet concentration, and cloud condensation nuclei.

The Active Scattering Aerosol Spectrometer Probe (ASASP) is an airborne in-situ spectrometer made by Particle Measurement Systems, Inc. It measures the light intensity scattered by aerosol particles to determine particle size distribution and concentration. The wide-angle ASASP probes can detect light scattered between 35 and 120 degrees from the laser-beam axis.

The Forward Scattering Spectrometer Probe (FSSP) is an in situ airborne optical particle counter initially developed by Particle Measuring Systems, Inc. It determines particle size distribution by measuring the light intensity scattered by individual particles within the cloud. FSSP can detect particles ranging from 0.5 to 47 μm in diameter. It functions at a wavelength of 633 nm and typically samples at a rate of 1 Hz.

A pyrgeometer is a ground-based or airborne passive radiation sensor. It measures downward and upward longwave radiation in the 4-50 μm spectral range. Pyrgeometers measure changes in resistance/voltage using a thermopile sensor to determine longwave radiation. These measurements can be used to calculate the infrared radiation flux. Pyrgeometers are typically used for climatological, meteorological, and agricultural applications.

Video cameras capture video recordings of various phenomena for research purposes. They are used on aircraft to provide continuous views of weather and terrain below the flight path. Video cameras are also employed to verify the aircraft's flight track. Additionally, they are deployed at field sites to monitor changes in vegetation, land cover, clouds, air quality, glaciers, and other Earth science phenomena.

A pyranometer is a ground-based or airborne radiation sensor that measures solar irradiance across a hemispherical field of view. It detects the amount of solar energy reaching the surface, capturing both direct and diffuse sunlight. Pyranometers operate within a spectral range of 280-3000 nm. They are most commonly used for solar monitoring, climate research, weather forecasting, agriculture, and energy management.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

The Differential Absorption Lidar (DIAL) is an airborne lidar system developed at NASA’s Langley Research Center (LaRC). It uses four lasers to detect lidar backscatter and provide profile measurements of ozone and aerosols in the atmosphere. DIAL operates in the ultraviolet (289-300 nm) for ozone detection and in the visible (572-600 nm) and infrared (1064 nm) for aerosols. It has a horizontal spatial resolution of approximately 15 km and a measurement accuracy of 5 ppbv.

The Quartz Crystal Microbalance (QCM) Cascade Impactor is an in situ airborne aerosol impaction system developed by California Measurements, Inc. It collects aerosol samples through an inlet, which are then separated using a mass-based inertial impactor. A QCM electronic mass sensor measures the samples' particle size distribution and mass concentration. The QCM Cascade Impactor can detect particles ranging from 0.05 to 25 microns in size and has a flow rate of 0.24 liters per minute.

NOx/NOxy is an in situ chemiluminescence instrument that measures nitrogen oxides and ozone in the atmosphere. It offers a spatial resolution better than 100 meters at typical DC-8 research flight speeds. NOx/NOxy can be used on ground-based, airborne, and shipborne platforms, enabling it to support various atmospheric chemistry and air quality studies.

Rosemount Temperature Probes are in situ airborne temperature sensors manufactured by Rosemount, Inc. They provide atmospheric temperature measurements and are typically used to collect flight-level meteorological observations. Rosemount Temperature Probes consist of temperature transmitters, thermocouple sensors, resistance temperature detectors, and other temperature sensors.

The Forward Scattering Spectrometer Probe (FSSP) is an in situ airborne optical particle counter initially developed by Particle Measuring Systems, Inc. It determines particle size distribution by measuring the light intensity scattered by individual particles within the cloud. FSSP can detect particles ranging from 0.5 to 47 μm in diameter. It functions at a wavelength of 633 nm and typically samples at a rate of 1 Hz.

Chilled Mirror Hygrometers (CMHs) are in situ sensors that directly measure dew point temperature by collecting water vapor on a chilled mirror surface. The mirror's temperature is lowered with thermoelectric coolers until water vapor from the sample gas condenses as dew or frost. The mirror's temperature is then measured using a platinum resistance thermometer (PRT) to determine the dew point and humidity. CMHs have been utilized on both airborne and ground-based platforms and serve as the NIST traceable reference standard for calibrating other sensors.

The Differential Absorption Lidar (DIAL) is an airborne lidar system developed at NASA’s Langley Research Center (LaRC). It uses four lasers to detect lidar backscatter and provide profile measurements of ozone and aerosols in the atmosphere. DIAL operates in the ultraviolet (289-300 nm) for ozone detection and in the visible (572-600 nm) and infrared (1064 nm) for aerosols. It has a horizontal spatial resolution of approximately 15 km and a measurement accuracy of 5 ppbv.

The Lyman-alpha Hygrometer is an in situ hygrometer designed for deployment on airborne or ground-based platforms. It measures water vapor absorption at the Lyman-alpha wavelength (121.6 nm) of atomic hydrogen to determine the total water content in the atmosphere. It has a detection limit of 0.1 ppmv and a typical data acquisition rate of 1 second. The Lyman-alpha hygrometer provides water vapor measurements with an accuracy of 6% and a precision of 5%.

Rosemount Pressure Probes are in situ airborne pressure sensors manufactured by Rosemount, Inc. They provide high-precision atmospheric pressure measurements and are typically used to gather flight-level meteorological observations. Rosemount Pressure Probes consist of various pressure transducers, gauges, and multivariable and coplanar transmitters.

Rosemount Temperature Probes are in situ airborne temperature sensors manufactured by Rosemount, Inc. They provide atmospheric temperature measurements and are typically used to collect flight-level meteorological observations. Rosemount Temperature Probes consist of temperature transmitters, thermocouple sensors, resistance temperature detectors, and other temperature sensors.

LI-COR Gas Analyzer is an in situ gas analyzer manufactured by LI-COR. They can be deployed on aircraft, research vessels, vehicles, balloons, and ground-based platforms. They provide measurements of various trace gases such as carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and water vapor (H2O). Most models use Optical Feedback-Cavity Enhanced Absorption Spectroscopy (OF-CEAS) to collect measurements. LI-COR gas analyzers have a typical measurement rate of 1 Hz and an operating temperature range of -25 to 45 degrees Celsius.

The Passive-Cavity Aerosol Spectrometer Probe (PCASP) is an in situ airborne optical spectrometer manufactured by Droplet Measurement Technologies. It detects light scattered by particles to determine aerosol size distribution and concentration within the 0.1 to 3.0 μm range. PCASP operates at a wavelength of 632 nm and typically samples at 10 Hz.

The Condensation Nuclei Counter (CNC) is an in situ optical sensor produced by Droplet Measurement Technologies. It detects cloud condensation nuclei (CCN) by supersaturating the sampled air, allowing CCN particles to become detectable. The particles are then measured with an optical particle counter (OPC). CNC can detect particles from 0.75 to 10 μm in diameter and operates at a sampling rate of 1 Hz. It is suitable for both airborne and ground-based operations.

The King Probe is an in situ airborne cloud instrument developed by Warren King (Commonwealth Scientific and Industrial Research Organisation) and manufactured by Particle Measuring Systems (PMS) and Droplet Measurement Technologies (DMT). The King Probe measures cloud liquid water content (LWC) by detecting the heat released when water droplets vaporize. It operates at a constant temperature of approximately 100°C and has a data output rate of 1 to 10 Hz. The probe is commonly used in studies of cloud microphysics and aircraft icing.

Nephelometers are in situ optical sensors that can be airborne or ground-based. They measure the total scattering and backscattering of aerosol particles in the atmosphere. Nephelometers operate at three wavelengths: 450 nm, 550 nm, and 700 nm, with a typical time resolution of 1 Hz.

The Precision Radiation Thermometer (PRT-5) is an in situ infrared temperature sensor. It makes non-contact infrared (8-14 μm) temperature measurements between -50 to 150 degrees Celsius with an accuracy of 0.5 degrees Celsius. It has a typical field of view of 2 degrees and a response time of either 0.3 Hz, 3 Hz, or 30 Hz. PRT-5 can be deployed on aircraft, vehicles, research vessels, and other ground-based platforms. It can be used for sea surface, ocean water, cloud, and air temperature measurements.

NOx/NOxy is an in situ chemiluminescence instrument that measures nitrogen oxides and ozone in the atmosphere. It offers a spatial resolution better than 100 meters at typical DC-8 research flight speeds. NOx/NOxy can be used on ground-based, airborne, and shipborne platforms, enabling it to support various atmospheric chemistry and air quality studies.

Thermo Scientific Gas Analyzers are in situ gas analyzers manufactured by ThermoFisher Scientific. They provide precise measurements of various trace gases such as ozone, carbon dioxide, carbon monoxide, and sulfur dioxide. Thermo Scientific Gas Analyzers can be deployed on aircraft, research vessels, and ground-based platforms.

The Forward Scattering Spectrometer Probe (FSSP) is an in situ airborne optical particle counter initially developed by Particle Measuring Systems, Inc. It determines particle size distribution by measuring the light intensity scattered by individual particles within the cloud. FSSP can detect particles ranging from 0.5 to 47 μm in diameter. It functions at a wavelength of 633 nm and typically samples at a rate of 1 Hz.

The Aethalometer is an in situ aerosol measuring device made by Magee Scientific. It can be used on both airborne and ground-based platforms. It collects aerosols through a filter tape and gauges the attenuation of transmitted light to assess black carbon particle levels. The Aethalometer works across seven optical wavelengths (370, 470, 520, 590, 660, 880, and 950 nm) and delivers data at a rate of 1 Hz. It has a measurement range of 0-500 μg per cubic meter and a resolution of 0.1 μg per cubic meter.

A pyranometer is a ground-based or airborne radiation sensor that measures solar irradiance across a hemispherical field of view. It detects the amount of solar energy reaching the surface, capturing both direct and diffuse sunlight. Pyranometers operate within a spectral range of 280-3000 nm. They are most commonly used for solar monitoring, climate research, weather forecasting, agriculture, and energy management.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

A pyrometer is a remote-sensing infrared thermometer that measures the temperature of distant objects. It determines an object's temperature by detecting its thermal radiation. It can be mounted on aircraft, ground vehicles, or water-based platforms for surface and sea surface temperature observations. For atmospheric studies, the pyrometer usually operates in the 9.6 to 11.5 µm spectral range and has a temperature range of -25 to 200 degrees Celsius. Pyrometers typically have a response time between 5 milliseconds and 600 seconds.

Generic-Radiometers refer to non-specific radiometers on a platform. These are typically passive microwave radiometers that measure brightness temperature. Radiometers can be used to retrieve temperature and water vapor profiles, soil moisture content, ocean salinity, precipitation and cloud properties, and vegetation.

NOx/NOxy is an in situ chemiluminescence instrument that measures nitrogen oxides and ozone in the atmosphere. It offers a spatial resolution better than 100 meters at typical DC-8 research flight speeds. NOx/NOxy can be used on ground-based, airborne, and shipborne platforms, enabling it to support various atmospheric chemistry and air quality studies.

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The Differential Absorption Lidar (DIAL) is an airborne lidar system developed at NASA’s Langley Research Center (LaRC). It uses four lasers to detect lidar backscatter and provide profile measurements of ozone and aerosols in the atmosphere. DIAL operates in the ultraviolet (289-300 nm) for ozone detection and in the visible (572-600 nm) and infrared (1064 nm) for aerosols. It has a horizontal spatial resolution of approximately 15 km and a measurement accuracy of 5 ppbv.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

The Turbulent Air Motion Measurement System (TAMMS) is an in situ airborne sensor used to gather aircraft navigation information. TAMMS consists of several subsystems, including pressure transducers and temperature sensors, an aircraft inertial navigation system, a central data acquisition system, and water vapor and other gas sensors. It provides measurements of aircraft position, flight level winds, temperature, pressure, and water vapor. TAMMS has a typical sampling frequency of less than 1 second and a spatial resolution of 5 meters.

The Differential Absorption Carbon monOxide Measurements (DACOM) is an airborne in situ spectrometer system. It uses the differential absorption technique and an infrared tunable diode laser (TDL) to collect measurements of nitrous oxide (N2O), carbon dioxide (CO2), carbon monoxide (CO), and methane (CH4) in the atmosphere. DACOM operates across the 4.7, 4.5, and 3.3 μm wavelengths to access the absorption lines for CO, N2O, and CH4. It has a measurement frequency of 5 Hz and a precision of about 1 ppbv.