NRL Airship
Naval Research Laboratory Airship

Generic-Atmospheric State (Gen-AtmsState) refers to non-specific instruments on a platform used for measurements of atmospheric state parameters. These are typically in situ sensors that measure temperature, pressure, humidity, and wind speed/direction. Types of atmospheric state instruments include thermometers, hygrometers, barometers, and anemometers.

The Optical Particle Counter (OPC) is an optical device used to measure aerosol particle size and concentration. It determines particle size and concentration by detecting the intensity of scattered light. Most OPCs operate within the visible to near-infrared wavelengths (500-1100 nm) and have a time resolution of 1 second. They are typically used to measure particles larger than 0.5 μm in diameter. OPCs can be used for both airborne and ground-based applications.

Thermo Scientific Gas Analyzers are in situ gas analyzers manufactured by ThermoFisher Scientific. They provide precise measurements of various trace gases such as ozone, carbon dioxide, carbon monoxide, and sulfur dioxide. Thermo Scientific Gas Analyzers can be deployed on aircraft, research vessels, and ground-based platforms.

The Particule Volume Matter (PVM-100A) is an in situ airborne cloud probe manufactured by Gerber Scientific. It measures liquid water content and the effective radius of cloud droplets by measuring the scattering intensity proportional to the droplets' density and particle surface area density. PVM-100A operates at 780 nm and has a measurement rate of up to 5000 Hz. It can measure droplets in the size range of 3-50 μm diameter. The ground-based model of this instrument is PVM-100.

Generic-Chemistry Related Sensors (Gen-Chemistry) refers to non-specific instruments on a platform used for atmospheric chemistry measurements. These are typically in situ analyzers that measure various chemical compounds such as trace gases, halocarbons, volatile organic compounds, nitrates, aerosols, and other chemical species. Measurements can include mixing ratio, composition, particle size, optical properties, and particle size distribution.

This description will be added in future versions

Condensation Particle Counters (CPCs) are in situ sensors that measure aerosol particle concentrations. CPCs determine aerosol levels by condensing fluid onto particles, causing them to grow to sizes detectable by optical scattering. Typically, CPCs can detect particles ranging from 7 nm to 3 μm, measure concentrations up to 100,000 particles per cubic centimeter, and provide readings every second. CPCs are manufactured by TSI Incorporated and can be used on airborne, shipborne, and ground-based platforms.